Nanjing Juge Environmental Technology Co., Ltd.
Add to Cart
Online Water Quality Hydrazine Analyzer
>>Application
To ensure the deaeration efficiency of the water supply system, hydrazine is added after the deaerator to achieve chemical deaeration. This requires maintaining a surplus of hydrazine in the system, which imposes higher demands on the timeliness and accuracy of hydrazine monitoring. The AG9267C Hydrazine Analyzer developed by our company adopts a photometric dosing method, cold light source spectrophotometry, and a dead-volume-free reaction cell, ensuring precise and reliable measurement.
>>Features
>>Technical Parameter
| Specification | Detail |
| Measurement range | 0-100 µg / L |
| Instrument display value error | ±2%F.S |
| Repeatability | ≤1% |
| Measurement period | minimum of 25 min |
| Stability | Baseline drift:Use a blank calibration without compromising accuracy |
| Chemical drift:not more than 1% reading / month (depending on reagent stability) | |
| Type of reagents | 1 kind |
| Temperature Sensor | PT 100 |
| Temperature measurement range | (0.0~60.0) ℃ |
| Temperature measurement accuracy | ± 0.5℃ |
| Temperature compensation range | (0.1~60.0) ℃ |
| Isolate the output signal and load | 4 ~ 20 mA (RL <500 Ω) |
| Alarm contact capacity | normally open contact AC220V / 3A, DC24V / 5A |
| Working conditions | Temperature:0~45℃ Humidity: ≤85% |
| Sample conditions | Flow rate:100-300 mL/min Temperature:(5~50)℃ Pressure:14 KPa |
| Permissible solid composition of water sample | ≤ 5 microns (no glue is allowed, no grease) |
| Power supply | AC220V± 10% 50Hz±0.5Hz power: 150W |
| Instrument external dimensions | height, 720, width, 460, depth, 360 (mm) |
| Instrument opening size | 665x410mm |
>>Dimension
